MOBILUS Cosmo|L, Manual

Page: 6 / 8

6
07. TRANSMISSION PROTOCOL SWITCHING COSMO - COSMO | 2WAY
Control remotes COSMO | L1, COSMO | L5 works in latest version of radio communication COSMO
| 2WAY. Control remotes COSMO | L1, COSMO | L5 are not bi-directional remotes, ie they are not
capable of displaying feedback.
If you need to change the mode to an older version (for example, if you purchase a new remote control
for older COSMO radio tubular motors), follow these instructions:
1. Activate the remote control.
2. At the same time, press and hold the UP + DOWN buttons on the back of the controller for
20 seconds.
3. When the LEDs are lit, the corresponding communication standard is activated:
LEDs flashing rapidly -the latest radio communication COSMO | 2WAY
LEDs blinking slowly - previous communication COSMO
It is not possible to check the active communication mode.
COSMO | L1
> 20 s.
COSMO | L5
> 20 s.