6. READING OF REMOTE INTO THE MOTOR’S MEMORY
WARNING!
Do not program the remote control when the shutter is in the extreme position (top
or bottom). Each program and changes of motor’s operation directions are confirmed by two
micro-movements of the driver.
Failure to comply with these rules may result in damage the blinds (inhaled by the housing).
1. Press the
LEFT / RIGHT
to select the appropriate channel.
Fig. 6a
1 channel
2 channel
3 channel
4 channel
Enter
MOBILUS motor, serie R
in the PROGRAMMING MODE OF MASTER REMOTE:
- press for 5 seconds
PROGRAMMING BUTTON
in the motor
- Fig. 6b;
- or double turn off and turn on the power supply od the motor
- Fig. 6c;
The confirmation of properly performed operation will be two micro-movements of the motor driver
- Fig. 6d.
Fig. 6b
a
b
c
5 s.
ON OFF
ON OFF
2x
Fig. 6c
ON OFF
2x
Fig. 6d
ON OFF
2x
5
Summary of Contents for COSMO G3+
Page 1: ...User manual of COSMO G3 controller www mobilus pl...
Page 11: ...13 NOTES 11...
