Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
To fold the bath bench press push buttons located in front and in the back of main frame at
each leg's pivot point and fold the legs. To limit the bench's size you can also detach handle,
soap holder and pull out the backrest if necessary.
Usage description
Place the bath bench so 2 legs (right or left) are placed inside the bathtub and 2 other legs
are placed on the foor.
Sit on the seating pad. Then pull and hold the red lever located under the seat on it's right
side. The seat lock will be released.
By changing body balance and pushing with your feet slide the seating pad with your body
towards the bathtub.
When the seat will stop release the lever. The lock should “catch” and the seat should be
secured in position. If the seat isn't locked, make small moves of it untill you'll hear the
“click” sound of safety lock.
To get out of bathtub repeat above steps. The direction of movement will be oposite to
previous one.
Transport recommendations
If it is necessary, device can be easily folded and transported
Accessories
There are no accessories provided for this device.
4. Technical data
Mobilex Bath Bench
302065
Overall width
107 - 111 cm
Overall length
49 - 53 cm
Overall Height (adjustable)
89,6 – 99,5 cm
Seat width
50 cm (with handle) / 57 cm (without handle)
Seat depth
39,5 cm
Under seat height (max. height tube edge)
45,5 – 55,5 cm
Weight of the product
6,5 kg
Maximum load
130 kg
Back Height
33 cm
Product label
The product label is located on frame in the back of the device
Image of the product label (not original)
Rev. 12/17
Page 4 of 5
UM-302065-GB
MOBILEX A/S
Grønlandsvej 5
DK - 8660 Skanderborg
Tel: +45 87 93 22 20
www.mobilex.dk
Sliding Bath Bench
Max. 130 kg
Produced
Serial no.
a better life in motion
