Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
bathtub. Fix the main frame setup with the 2 locking bolts located under the frame.
●
If necessary relocate the seat by moving it's assembly into one of the other holes placed on
the central fxing plate (3 positions available). This is done by unscrewing the plastic handle
placed underneath, move the seat to a new position and ft the plastic handle again.
●
Check if the seat can rotate freely when the locking lever is lifted.
Function description
●
Turn the seat towards the bath edge by pulling the locking lever up and rotating the seat
frame.
●
Turn yourself backwards to the seat, place your hands on the armrests and sit on the swivel
bather.
●
Pull the locking lever up and rotate yourself with the seat frame towards the center of the
bathtub. Assure that the locking lever is locked in that position, so the seat won't move
unintentionally.
●
To get out of the bathtub repeat above steps in reverse order.
Transport recommendations
If necessary the device can easily be detached from the bathtub and transported. Always assure that
the device during transportation is safely secured against unintended movements.
Accessories
There are no accessories provided for this device.
4. Technical data
Mobilex Swivel Bather
302022
Overall width
71 cm
Overall length
54 cm
Overall Height
57 cm
Seat width x depth
41 x 34 cm
Width between armrests
56 cm (at the top) / 51 cm (at the bottom)
Height of the armrests
38 cm
Weight of the product
4,88 kg
Maximum load
130 kg
For bathtub widths (internal)
57-66 cm
Rev. 12/17
Page 3 of 5
UM-302022-GB
