
Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Fixed toilet seat raiser
Intended use of the device
The Mobilex Product is medical device which is intended to be used by elder or disabled persons only
as a seating option and additional support for toilet. Any other use is prohibited.
Safety requirements
✔
Use the product only in perfect technical condition
✔
If you fnd any damage or defects to the product, please contact your dealer immediately
✔
Observe the details on the product label
✔
Please use the product only for the intended application
✔
The load capacity of 120 kg does not refer to the lid of the toilet seat.
The lid is not suitable for sitting.
✔
Make sure you have a tight screw connection to the toilet bowl.
✔
Ensure that the height adjustments are evenly adjusted.
✔
Support the armrests evenly with both hands.
Product description
The toilet seat raiser 301703 can be mounted on most used toilet ceramics. The fxation takes place
at the receiving holes on the toilet. The armrests can be swiveled and removed without tools. The
seat can be removed for cleaning.
Assembly description
1. Remove the existing toilet seat and lid.
2. Adjust the width of the two brackets to the hole width on the toilet ceramic.
3. Fix the toilet seat raiser with the plastic mounting nuts.
Height adjustment
1. At the back of the toilet seat raiser remove the cover plugs from the holes you want to use.
2. On the rear side loosen the two hand screws of the support rod and screw the support rod to
the desired position.
3. The front support rod is telescopic and can be adjusted to the desired length by removing the
two adjusting clips. Then fx the length by re-placing the two clips. Now you have to ft the
matching support rod into the desired support grid.
4. Make sure that all 4 settings are set to the same height.
Rev. 12.17
Seite 2 von 10
UM-301703-Multi
GB
Armrests
Telescopic
support rod
Holes for height
adjustment
Brackets with
plastic handscrews
Lid
Hand screw for
the height
adjustment
Support grid
Adjustment
clips