background image

 Mirror/Monitor Features

3

1. 4.3” LCD Monitor

2. Rearview Camera Selection Button (CAM)

3. Power On Indication LED  

4. Adjustment Button for Image Settings

5. Rearview Mirror Glass

2

4

5

CAM 

3

 General Operation

The mirror/monitor automatically activates every time the ignition key is turned “On”. The mir-
ror/monitor will turn Off when the ignition is turned to the “Off” position.

Rearview Camera:

• When a rearview camera has been installed, whenever the vehicle is shifted into reverse 

gear the monitor will automatically display the camera image. The rear observation camera 
image turns off automatically anytime the gear selector is moved out of the reverse position.

• Pressing the 

CAM

 button will display the image from the rearview camera on the monitor. Press 

the 

CAM

 button again and the image from the rearview camera will no longer be displayed.

Note:

 If the vehicle is put into reverse the rearview camera image will automatically be 

displayed on the monitor.

LCD Monitor Settings Control

The monitor adjustment button is located on the bottom center of the rearview mirror. Move 
the button up and down to choose the setting you want to adjust. Move the button to the 
left and to the right to adjust the setting’s value. Press button to accept.

BRIGHT 10

CONTRAST 10

COLOR  

10

HUE  

 

4

BRIGHT 0-20

CONTRAST 0-20

COLOR  

0-20

HUE  

0-4

Adjustment Screen Settings                        Setting Adjustment Range     

Summary of Contents for REARVIEW MIRROR/MONITOR M35









Reviews: