11
3.6 USB Connection
Before you can transmit a document, you must first set the storage mode for your xTablet.
To set the storage mode
1.
Use a USB transmission line to connect the xTablet to a computer. You will see a notification prompt when the connection
is successful.
2.
On the xTablet, tap the status bar to display its options, then tap USB connected to open the USB storage device.
Figure 3-4:
Connections Prompt
To copy documents to a storage card
1.
Use a USB cable to connect the xTablet to a computer. A prompt will appear when the connection is successful.
2.
On the computer, open the browser for the PC, then open the “removable disk (x)” drive.
3.
Copy the document you want to the “removable disk(x)” drive.
4.
On the computer, tap the “Safely Remove Hardware” option in the task bar to unload.
To copy the content of an xTablet storage device
You can use either of the following USB storage devices via connections with your computer:
•
NAND FLASH storage device and space for xTablet to store document itself.
•
TF removable memory card.
NOTE: When your xTablet is connected with a USB cable and you start up the USB storage device, you cannot access the
memory card through the xTablet. To access memory card via the xTablet, you must first disconnect the USB cable.