Remote - Web Browser Session
MA 850 Installation and Configuration Guide
35
2.
Click
OK
and immediately press
Enter
to go into Setup Mode. The current
settings will be displayed, followed by the
Change Setup
menu.
Change Setup:
0 Server configuration
1 Channel 1 configuration
3 SNMP configuration
7 factory defaults (for manufacturer use only DO NOT
SELECT!!)
8 exit without save
9 save and exit Your choice ?
3.
Enter
3
(SNMP Configuration).
4.
Set the SNMP Read and Write community names and the SNMP traps destination addresses
(up to three addresses can be defined) by responding with
Y
to the prompt
Set the
Gateway IP Address
and defining the Address (as illustrated below).
SNMP community name for read ():
public
SNMP community name for write ():
private
Enter IP addresses for SNMP traps:
1: (000) 192.(000) 168.(000) 10.(000) 22
2: (000) .(000) .(000) .(000)
3: (000) .(000) .(000) .(000)
5.
Press
Enter
to run through the rest of the parameters. When the Setup
Menu is displayed again, select
9 – Save and Exit.