Mobile Crossing BLUETOOTH GPS, User Manual

Page: 6 / 28

6
when the battery is fully charged. This can take up to 8
hours the first time the unit is used.
The vehicle charger includes a step down regulator to
provide 5 Volts to charge the GPS. The unit can remain
plugged into the charger while in operation which will
provide unlimited use.
Installation and Setup
A suitable location for the GPS will need to be
determined. A Velcro strip is included that can be used
to secure the unit in a vehicle while still providing
portable use when needed.
The two small strips are for the unit and should be
placed across the bottom on either side of the serial
number. The larger strip should be place in the car.
If you plan to use the unit with its internal antenna the
recommended location is up near the windshield on the
dashboard. The antenna should be facing up. The
power switch should be easily available to the driver.
If you plan to use a remote external antenna then the
unit can be installed in any location where the antenna