Mobicool A-40 DC, Operating Manual

Page: 9 / 248

EN
A40 Safety instructions
9

The appliance may be connected to more than one source of
energy.
2.3 Operating the device safely with 12 V
g
A
NOTICE!
 The cable between the battery and the cooler must be protected
by a fuse of max. 8 A.
 Only use cables with the corresponding cable cross section
(see the table on page 13).
2.4 Operating the device safely with 220 V – 240 V
!
WARNING!
 Only use the connection cable supplied to connect the device
to the AC mains.
 Never pull the plug out of the socket by the cable.
 If the cable is damaged, it must be replaced by a cable with
the same technical specifications to prevent possible electrical
hazards.
 Before starting the device, ensure that the power supply line
and the plug are dry.
 Check that the voltage specification on the type plate corre-
sponds to that of the energy supply.
2.5 Operating the device safely with gas
!
WARNING!
 Only operate the device with gas outdoors .
 Do not use gas to operate the device in cars, boats or enclosed
spaces.
 When using the device in tents, awnings and on level patios,
ensure that there is sufficient air circulation and ventilation.

Never place the device near flammable materials (paper, dry
leaves, textiles).
 Compare the pressure information on the type plate with the
pressure information on the propane or butane gas cylinder.