Mobeye ThermoGuard TwinLog CML2285, User Manual

Page: 23 / 40

22
5.14 POWER FAILURE MESSAGE
If the Mobeye CML2285 is powered externally and the power fails, it is able to make
phone calls and/or send textual messages. There are three configuration options:
Alert, Alarm, Off.
Mobeye SIM/Portal Own SIM
Alert Message via portal SMS to TEL1
Alarm Call to TEL1···TEL5 and
message via portal SMS + call to
TEL1···TEL5
Off No message No message
The default setting for the
‘power failure message’ is set to “ALARM”.
5.15 POWER FAILURE DELAY TIME
If the Mobeye CML2285 is powered externally and the power fails it can notify the
contact person(s). The power failure delay time defines the time between the initial
power failure and the alarm notification. If the power is restored within the delay
time, no alarm is sent. The time can be set between 0 and 999 minutes. As default,
the delay time is set to "0".
5.16 AUTOMATIC ARMING / DISARMING
The Mobeye CML2285 only works if the unit is armed, which is done via the button.
It is possible to automatically arm and disarm the unit, based on an arming and/or
disarming time scheme. Two schemes can be entered, which can be assigned to the
days in the week (e.g. to have a different weekend scheme).
As default the automatic (dis) arming times are valid for all days. It is possible to
assign them to only a few days in the week. In this way it is possible to have two
different schemes, which are valid on different days.
As value the weekdays can be entered. Monday is 1, Tuesday is 2, etc. If the
scheme is valid for several days, the days can be entered in one command (e.g.
12345 means Monday till Friday).