6
When using the Mobeye SIM card:
The supplied SIM card has a PIN code protection, which means that it can only be
used in the Mobeye device.
Note:
do not place it in another device.
When using your own SIM card:
An own
SIM card has a “micro” format, is suitable for the 2G network and can make
calls and send text messages. The PIN code is "0000", or the SIM is PIN code free.
(A PIN code can be changed or removed by putting the SIM card in to any mobile phone and
entering the 'security' menu.)
NB: The settings are saved in the device memory.
Insert the batteries
Insert the two batteries (CR123) in the module. Use the +/- indication for the
correct placement.
3.2
NETWORK CONNECTION AND PROGRAM MODE
After placing the batteries the Mobeye CM4410 will search for the network. The
LED flashes green and red. This process normally takes 10-30 seconds, in a new
device this can take some minutes. When the network has been established the
LED will first blink green rapidly and next stay green (or flashes 1 sec. on/1 sec. off
in case the unit has not been configured yet).
After 3 minutes a time-out occurs, after which the communication module switches
off in order to save the batteries. In this low power mode the LED flashes once per
3 seconds. It will search for network connection once it needs to send notifications.
It can been forced to establish a network connection by re-inserting the batteries.
