2
1.
GENERAL DESCRIPTION
The Mobeye GSM fire alarm communicator CM4410 is a battery operated
monitoring device with integrated communication module used to send alarm
notifications after the input is triggered by a Ei Electronics smoke or heat detector.
The Mobeye 4G Smoke Detector CM4400 is a combination of the Ei605TYC (by Ei
Electronics) and the Mobeye CM4410. For other combinations see section 8.1.
In order to activate the device, a few steps are to be followed.
First of all, you need to insert a SIM card. With the Mobeye SIM card, the CM-
Guard uses the 4G LTE-M network. This network has a strong network coverage,
deep penetrability in buildings and also works in remote areas. The Mobeye SIM
card is a 'multi-provider' and can be used internationally; it may choose from
several providers per country. In case of a network problem it will switch to another
provider or fall back to 2G. In addition, the Mobeye SIM card offers access to the
Mobeye Internet Portal. This management environment gives the device essential
functions such as online programming, display of status and history, extensive
possibilities for reporting messages and will also monitor test messages (keep
alive).
Optionally, alarm messages are sent as a push message via an app. The relevant
contact person will receive instructions and an installation link on their phone.
It is also possible to place your own (2G) SIM card. The most important alarm
functions such as calling and/or texting after an alarm also work. The
communication goes entirely through the 2G network. The Mobeye Internet portal
features will not work.
Where the installation steps differ for both modes of use, this is indicated. The use
of the Mobeye Internet Portal with Mobeye SIM card is also referred to as Mobeye
SIM/Portal.
