4
2.3 CONNECT THE POWER SUPPLY
Connect the external power adapter to the power input of the Mobeye Call-Key (press the
orange pins for connecting the wires):
•
V+ to “+”
•
Ground to “-“
When using Mobeye adapter 10027 (European type):
‘V+’ is black wire with white stripe, ‘Ground’ is black wire. Otherwise please look at the
adapter for the ‘+’ and ‘–‘.
The GSM-status-LED displays the status. As long as no GSM connection was established,
the LED flashes about 1 time per second. As soon as the connection is made, it will flash
once in (about) 3 seconds.
Optionally 4 batteries (4 * CR123) can be placed. If these are inserted, the Mobeye Call Key
will send an alarm message in the event of a power failure. After sending the outage report
the unit itself will g
o to the "Low Power” mode, which means that the GSM module will shut
down to save the batteries. In this 'Low Power” mode, the unit will not be able to receive
incoming phone calls. Internal triggers, such as (alarm) messages on the inputs and test
reports may be sent.
Close the Mobeye Call-Key using the 4 screws.
2.4 SIGN UP IN THE MOBEYE INTERNET PORTAL
Go to www.mymobeye.eu and sign up for a new account. Follow the instructions on the
screen.
You will receive an e-mail to confirm the new account. After confirmation please login to the
portal.
If you did not receive this e-mail, check your spam box or ask Mobeye ([email protected]).
Sign-up for new account
Summary of Contents for Call-Key
Page 24: ......
