background image

© MOBATIME 

5 / 12 

800913.02 

General Information: Introduction 

3.1 Measurements 

 

All specifications in mm. 

3.2 Introduction 

The 

TREND 

is a self-setting clock with hour, minute and second hand. It is powered 

and synchronized by the MOBALine signal. It is available in the diameters 30 cm and 
40 cm. 

Features: 

  MOBALine controlled by connected MOBALine master clock with automatic time 

takeover and daylight saving time change. 

  Signalization of a missing MOBALine time signal after 24 hours by setting the hands 

to the 12 o’clock position. 

  Two motors for hour / minute hand and second hand. 

  Push-button for the configuration for operation with the NMI interface. 

  The operating mode of the minute hand is controlled by the MOBALine signal 

(identical for all clocks of a clock line). 

 Powered 

by 

MOBALine. 

3.3 Power 

supply 

The clock is powered by the MOBALine slave clock line. 

Power consumption from MOBALine: max. 10 mA 

3.4 

Accuracy / Synchronization breakdown 

The deviation in the synchronized state is typically smaller than +/-50 ms. 

The clock signals a synchronization breakdown after 24 hours by setting the hands to 
the 12 o’clock position. The deviation after 24 h without synchronization is typically 
smaller than +/-2 s (quartz accuracy: 20 ppm at room temperature).  

Notice:

 the mentioned deviations depend on the accuracy and the capacity of the 

master clock (MOBALine). 

 

 
 

Summary of Contents for MOBALine TREND













Reviews: