MOBA R.3CHS, User Manual

Page: 15 / 28

15
● Capacity for the operator to manually move the blade or bucket using
bring it to 'On-Grade'.
2.3 Operating With MOBA Control Panel a
● Electrical output for driving solenoids of hydraulic valves.
● Capacity to automatically control the blade or bucket of a machine to
The operator can use a combination of manual and automatic control if
In general, each MOBA control panel has all the functions available with
display panels plus:
A range of MOBA control panels are available, such as the CB.D2.CAN, the
DUO2.CAN and the CB.2001. Each one offers different capabilities in terms of
the number of control sides available, the types of hydraulic valves controlled,
the combinations of connecting sensors and electric masts and the degree of
configurability.
buttons or switches on the control panel or through an optional joystick.
required.
The Laserguide connects to MOBA control panels, sometimes indirectly
through junction boxes, by cable attached to the military connector at the base
of the unit. See Figure for examples of control panel setups using the
Laserguide. Contact MOBA Australia or a local representative for advice on
the control panel model and setup most suited to your needs.
6
When used in conjunction with a MOBA control panel, the Laserguide can
automatically control earth moving operations such as for land levelling. The
control panel integrates with the machine's hydraulic system and uses the
electrical input from the Laserguide to control the machine's bucket or blade
position to bring it 'On-Grade'. This is done by activating electrically operated
solenoid valves in the machine's hydraulic system.
© Copyright MOBA Mobile Automation Australia Pty Ltd
Operating the Laserguide