Before removing memory card, stop recording. Press on the card until it clicks to remove it.
Motion detector recording is available after you switch on this item in the setting menu (see
“Setup “paragraph below for more details). The unit will go to recording mode if there is image motion
in front of the lens. W hen motion is detected, the unit will start to record a video fragment (no matter
whether there is motion or not during the recording period), after the fragment is recorded, the unit
reverts to standby mode until a motion is detected again.
G-sensor. If overload resulting from an impact exceeds the setup value (1 g = 9.8m/ s^2; see
“Setup “paragraph below for more details), the current video fragment will be automatically protected
from re-recording.
SOS function. When you press Block button during video recording, the current fragment will be
protected from rerecording.
During recording press UP to mute the sound, press DOWN to force screen shut off.
Playback mode:
Stop the recording and press M
To enter playback mode. Press UP/DOWN button to choose the file. Press OK button to play the
selected file. Press OK button to stop or resume playback.
In file playback mode select a file, and then hold the M button. A menu will appear in which you can
select to delete, protect or slide show the file. Select either option, then press OK button to confirm.
AV output and HDMI output:
Connect this unit (AV out) to an external audio-video device (e.g. car TV) with the supplied audio-
video cable. Now this unit can be used as audio and video signal source for the external device.
Connect the HDMI output of this unit to an external audio-video device (e.g. car TV) with a HDMI
cable (not supplied). Now this unit can be used as high-quality digital signal source for the external
device.
Setup:
In recording mode, hold the M button to choose the required operation mode (Video/ Photo/Playback). Press M
to enter the setup menu for the current mode.
In the me nu press UP/DOWN buttons to select settings. Press OK button to go
to adjustment of the selected setting; select options with cursor button and press OK button to confirm.
Some menu items may be in grey colour; in this case, they are not adjustable. The menu in your unit may
be changed without prior notice and hence be different from the menu described below.
General system setup:
Date/Time: set the current year, month and day by pressing UP/DOWN buttons and pressing OK
button to confirm.
LDW: select a parameter [ ON/OFF / CAR TYPE /SENSITIVITY / AREA CHOICE / START
SPEED / ON/OFF SOUND ]
Auto Power Off: 1m/2m/5m: select the time period after which the unit will automatically switch off or
disable this function.
Beep Sound: enable or disable beeping sounds when pressing buttons on the unit. Delay Off:
Off/30s/1m/3m: select the time period after switching the car ignition off when the unit will continue
