2. Do not bleach
3. Do not tumble dry
4. Do not iron
5. Do not dry clean
Use:
Visibility bands are intended to signal the user's presence
visually when illuminated by vehicles on dark roads. These
products are useful because the movement and reflective features
attract the attention of the observer.
Attachment method:
If you want to use the reflective wrist strap,
attach it to your wrist / ankle or to the part you want to mark with
the reflective surface upwards, firmly hold one reflective end and
bend the second end until the band snaps together. To straighten
it, loosen it and pull it until a “cracking” sound is heard - the band
returns to its original position.
Inappropriate use:
The bands should not contact with liquid
chemicals, especially solvents, and fire. Excessive mechanical
damage (tearing, ripping, etc.) must also be avoided.
Products must not be damaged or destroyed during transport.
CAUTION!!! Lifetime of the removable belt. This product must
be kept clean in order to remain functional. Immediately
replace it if it is permanently dirty or faded.
Use restrictions: To provide the correct protection as stated
above, the band must be worn over the outer garment and
must not be covered.
Storage:
Do not store in direct sunlight. Store in a closed, dry
storage area, protected from heat from radiators, store at least 1 m
from a radiator. If the band gets wet, wipe it with a soft cloth and let
it dry at room temperature and then store it.
Maintenance:
The reflective band can be cleaned by hand, with a
soft cloth, sponge or soft brush. After cleaning the band, rinse it
with clean water, wipe it with a soft cloth and let it completely dry.
Never wash the product in a washing machine, do not use
chemicals to clean, iron or dry in a tumble dryer or near a radiator.
