Juice Extractor
- English Instruction Manual
6
EN
JUICING
1.Before using, please confirm the button switch of the main machine in
a stop state, in this way, in case assembly is not completed, starting the
main machine can be avoided, so unnecessary damage for persons or
property avoided.
2.Before juicing, first confirm juicing net and rotor clutched in position,
and no hard contact between juicing net cutter and transparent cover.
Put the transparent cover on, put the handle into the cover slot, then turn
on the machine.
3.For using, assemble according to the diagram of “name and position
of main components”. Turn on the power supply, press switch to let the
machine run no-load for 5 sec. Put prepared vegetable or fruit into feed
port of the juicer, press with the pushing bar, evenly, hard and slowly,
juice of the vegetable or fruit can be found, original, fresh, good for
health.
4. Note: when pressing food with the pushing bar, force shall be even
or indirect, pressing force shall not be more than 1 kg, no too sudden
force, otherwise, juicing effect will be reduced.
OPERATING TIME
This machine is designed with button switches of O grading, I grading,
II grading (O for stop, I for weak grading, II for strong grading). For
juicing, select strong grading, for operating time, after operating for
1min, stop for 1min, then use again. After the above operation is
performed three times, stop for 15 min, do not operate until the motor
is cooled, in this way, the service life of this machine will be prolonged,
the machine will serve you more efficiently.
