www.mo-sys.com
19
Cinematic Focus XR
Configure the component.
1. Enter
the
com
port
used
for
communication
2. Check Emit Focus Event if using multiple
rendering nodes.
3. Specify a distance in [cm] from the LED
screen. The physical focus should stop
while pulling focus into the virtual scene,
to mitigate the Moire Effect, which
appears when LED array is in focus. The
inserted distance should allow the
system to keep it just outside of the
depth of field.
In
nDisplay config blueprint
, set the
collision presets in collision section on the
mesh(es) used with viewports as follows:
Collision Presets
set to
Custom
and below
Object Type
is set to
LED
.
Finally, set
Manual Focus
to true to enable
Hand control to set the focus distance.
There is a sample level with the component
already on the camera. It’s
nDisplayLensControl
in MoSysVPPro Content
-> nDisplay -> LensControl.
Other Render Nodes setup
If used with multi Render Nodes there has
to be an extra component added to the
camera to receive the focus updates.
Find
“
nDisplayFocusReceiver
”
in
MoSysVPFree Content/Blueprints.
Drag the nDisplayFocusReceiver onto the
MoSysCameraNDisplay’s
components
