10
be observed when using the heater:
Do not touch the heather with wet hands.
Do not handle with bare feet.
Do not let children play with the electrical appliance.
11. Avoid the use of an extension cord with this product, because the
ATPAJOEKJ?KN@I=UKRANDA=P=J@?=QOA=NEOGKBłNA
12.
!KJKP=LLHU=JUIK@Eł?=PEKJPKPDALNK@Q?P
13. Keep connections dry.
14. If the power supply cord is damaged, avoid to use the appliance.
For power cord replacing, please contact the manufacturer or the
PA?DJE?=HOANRE?AKN=LANOKJSEPDOEIEH=NMQ=HEł?=PEKJEJKN@ANPK
=RKE@=JUNEOG
15. If the appliance is not used for a long period, disconnect it from
the power supply.
16. Always disconnect the appliance before doing any maintenance
operation.
CAUTION - Some parts of this product can become very hot and
cause burns. Particular attention has to be given where children
and vulnerable people are present.
2. ELECTRICAL INSTALLATION
The installation should always be carried out by a qualified electri-
cian or a competent person in accordance with the current electri-
cal standards:
HD 384 CENELEC for Mainland Europe, IEC 60446 and BS 7671
for the United Kingdom, IEC 60445(2010) & ET101:2008 for Ireland
and IEC 60364-7-708 1988 Internationally.
The energy supply to the heater must always be properly earthed.
The appliance must be connected to energy supply line by means
of the provided H05SS-F silicone cable.
An overvoltage category III Combined Circuit breaker and Residual
Current Device (RCD) with rated earth leakage operation not ex-
ceeding 30mA must be fitted upstream on the supply line. The
circuit breaker must have a contact opening distance of at least 3
mm.
The heaters should always be installed only using the mounting
