MMSOFT Design Pulseway, User Manual, Page: 27 / 85

System Configuration
Pulseway User Manual Page 27 of 85
4.1.5. Hardware Sensor Settings
It’s always a good idea to monitor your hardware’s sensor and temperatures and Pulseway
helps you keep a close eye on them. You can configure your temperature unit of measure
from the Agent:
4.1.6. Wake on WAN
Wake On WAN requires:

A motherboard that supports Wake on Lan

A wired network adapter that supports Wake on Lan

Wake on Lan activate on BIOS

Proper port forwarding if computer is behind a router/firewall
By default Wake on Lan is using UDP port 9, so if your computer is behind a router or a
firewall you will need to forward that port. More information can be found at
www.portforward.com .
Note: Tapping on the pen icon on the upper right corner will create a Draft email with
the contents of the log entry.