By pressing OK the entries will be saved and the menu exited.
Press F3 to exit the menu without saving the changes.
Note: More conveniently, the measurement point texts can also be entered using the
available computer software.
Once you have assigned the VMID serial number a text, the VM25 will display the
text continually, as soon as the sensor makes contact with the measuring point (Fig-
ure 22).
Aside from this, the VM25 reverts automatically to the saved operation mode. In
this way it is ensured that measurements are always taken with the correct settings.
Note: Changing the measuring point data also effects the display of saved measur-
ands (cf. Chapters 6.5 and 6.6). The current saved text of the respective VMID serial
number is always displayed in the measurement data. Changing the operating mode
of a measuring point only affects measurands saved subsequently and does not have
any effect on the measurands that have already been saved in the memory.
The measurement point data is saved in the instrument. If several instruments are
used at the same measurement point location, the measurement point data will need
to be saved within each instrument. The available PC software enables the conve -
nient management of measurement points.
17
Figure 21: Entering ID text
Figure 22: ID text display
