6
means set up successfully, at the same time, the low digit-6 flashing, you can go on
setting other requester numbers.
e. After setting up all the requesters, cut off the power of the host and power on again or
wait for20 seconds, the screen will back work mode, then you can use this system now.
2
）
Delete requester number:
a. Do as “a” and “b” steps of the above, then enter to set up mode, and modify numbers.
b. After modifying the requester number you want to delete, e.g. 16 SET, press“DEL”,
then the screen displays 16 DEL, means this number has been deleted, at the same
time, low digit-6 flashing, you can go on deleting or set up other requesters.
c. After deleting requester number, cut off the power of the host and power on again or
wait for20 seconds, the screen will back work mode.
3
）
Clear up all the requester number:
a. Do as the first two steps of “set up requester number” to enter to set up mode, and
modify number to “00”.
b. Screen displays 00 SET, then press “DEL” button, when screen displays CLR ,
means all the numbers of the requester are deleted.
c. After that, cut off the power of the host and power on again or wait for20 seconds, the
screen will back work mode.
4
）
Modify volume
：
a. On working mode, Press the “ALT/-” button on the host for 4 seconds without release,
then enter to modify volume state, the host displays volume grade, e.g. 10-SOUND.
b. Then the screen displays current volume band, e.g. 10—SOUND, press “ALT/-” or
“TAB/+” buttons can increase or decrease the volume.
c. After modify to suitable volume, press “DEL” or “ENT” or wait for 10 seconds, you can
exit from volume modifying state.
