MLB-G4201 Wireless Terminal User Manual
19
Rev 1.1
Step 3
:
Please connect power supplier with 5~32VDC, then boot up. The LED will light up when MLB-
G4201 ready.
Step 4
：
After plug-in power adapter. The wireless terminal is usually fully operational within 30
seconds, after powering it up. Depending on the signal strength of the network in the area, logging into
a network may take longer and is outside the control of the wireless terminal.
The device is ready after LED of signal is lighted. Then user can operate it.
Step 5:
When user use the MCCU (MLiS Cellular Configuration Utility) to
configure MLB-G4201, please refer the connection as below:
