blast or spray oil.
Often check whether there has enough fog liquid.
Get out all fog liquid before transport or post.
Don’t eat fog liquid otherwise to see the doctor immediately. Use clean water to wash skin and eyes
once fog liquid touches them.
Remove package and check:
1.
Open carton to check whether all necessary spare parts include accord the specification list.
Please contact distributor if there are something missed.
2.
Check the appearance of machine and power line to see whether they have some obvious
damage. Please contact distributor once you find something and stop to use fog machine.
Installation:
1.
Take away all pack material especially the spray mouth.
2.
Set in the horizontal direction and open the cover of liquid can.
3.
Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality fog
liquid will damage fog machine.
4.
Plug the plug of remote console in the socket of the back of machine.
Operation:
1.
1connect the power line to the power socket with earth line. Turn the switch at “ On “ and the
machine heat. The red LED of line console will light once the machine finish heat.
2.
Press red key, the machine will spray fog (Press it as long as you need).
3.
3.The red LED of remote console light or not means the machine can spray fog or heat
itself.
4.
Can set the machine at a high place (with hanger) or on the ground. Do not spray fog to people
directly and the lean angle should less than 15
。
.
5.
Often check whether there has enough fog liquid in machine. The operation will make big
damage to the machine if there has no fog liquid.
6.
If the fog is small, plum has noise or there has no fog, please power off and check fog liquid, fuse,
the connector of remote console and power plug. If the problem could not be solved after check
these parts, please stop check and send it back to distributor for repair.
Repair:
Please clean the fog machine timely to avoid the damage of spare parts and decrease the repair
charge.
Don’t make the fog machine be dirty. Screw the cover of liquid can after add fog liquid.
After about 40 hours continually use, please use 80% distilled water and 20% vinegar to clean the
dirty in refractory pipe.
Disassemble the spray mouth and use vinegar to clean it to keep expedite before heat.
Reequip the spray mouth after cool and add fog liquid for next use.
Others:
Clean timely to extend the lifespan of machine.
Use dry cloths to clean machine and keep dry while store.
