background image

WARRANTY

This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance with 
the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will 
invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place 
of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation 
costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve 
the right to alter product specification without prior notice. 

GENERAL

This product contains a light source of energy efficiency class G to Regulation (EU) No 2019/2015 and (UK) 
2021 No. 1095. This product contains an LED light source and a control gear which can be replaced by a 
professional. 

Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not 
use aggressive cleaning products or solvents which may damage the product.   
Do not use any source of high-pressure washers to maintain or clean this luminaire. 
It is recommended to add a bead of clear silicone around the product to aid the IP rating if installed in an 
exposed outdoor location.  
This product is non-dimmable. 
This product should be dismantled for disposal when it reaches the end of its life. Please see website for 
dismantling instructions. 
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities 
for where facilities exist.  

Summary of Contents for LWR2G






Reviews: