WARRANTY
Type T3BIA/T3PIA and T3BIB/T3PIB Valves with RS-232 Interface
MKS Instruments, Inc. (MKS) warrants that for one (1) year from the date of shipment the equipment
described above (the “equipment”) manufactured by MKS shall be free from defects in materials and
workmanship.
For the period commencing with the date of shipment of this equipment and ending one (1) year later, MKS
will, at its option, either repair or replace any part which is defective in materials or workmanship without
charge to the purchaser. The foregoing shall constitute the exclusive and sole remedy of the purchaser for any
breach of MKS of this warranty.
The purchaser, before returning any equipment covered by this warranty, which is asserted to be defective by
the purchaser, shall make specific written arrangements with respect to the responsibility for shipping the
equipment and handling any other incidental charges with the MKS Sales Representative or distributor from
which the equipment was purchased or, in the case of a direct purchase from MKS, with the MKS home
office in Andover, Massachusetts, USA.
This warranty does not apply to any equipment which has not been installed and used in accordance with the
specifications recommended by MKS for the proper and normal use of the equipment. MKS shall not be
liable under any circumstances for indirect, special, consequential, or incidental damages in connection with,
or arising out of, the sale, performance, or use of the equipment covered by this warranty.
MKS recommends that all MKS pressure and flow products be calibrated periodically (typically) every 6 to
12 months) to ensure accurate readings. When a product is returned to MKS for this periodic re-calibration it
is considered normal preventative maintenance not covered by any warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER RELEVANT WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY AGAINST
INFRINGEMENT OF ANY PATENT.
