19-5000-M Version 1
6
Voltage Detection System Series 5000
NOTE: This input may be used for other than a probe input, e.g., an
antenna input.
2.3.2
Proximity Jack
The proximity jack enables you to insert an antenna to monitor general
ESC activity in the vicinity of the workstation (Figure 2, item 3). Again, this
is a standard banana jack. NOTE: This input may be used for other than
an antenna input, e.g. a probe input.
2.3.3
Ground Connectors
The ground connectors enable you to connect a grounding device for
either the probe or proximity monitoring function (Figure 2, items 2 and 4),
using a standard banana plug.
2.3.4
Probe Voltage LED Display
The probe voltage LED display shows the polarity and voltage level
detected by the instrument (Figure 2, item 5). The left two lights indicate
polarity (Figure 2, item 7). The next two spaces are blank, and the balance
of the lights display continuous real-time measurement of voltage levels.
The first light activates at 7.1V, the second at 10V and so on.
2.3.5
Peak Hold LED Display
The peak hold LED display shows the polarity and
highest
voltage level
detected by the instrument (Figure 2, item 8). The left two lights indicate
polarity and the lighted section of the peak hold display shows the highest
voltage detected since the peak hold reset button was last pressed.
2.3.6
Reset Button
The reset button is used to reset the peak hold display (Figure 2, item 9).
Simply press the button to reset.
2.3.7
Optional High Voltage Power Supply Switch
The optional high voltage power supply switch (Figure 2, item 10) may be
used for charge plate decay time testing.
Summary of Contents for Novx 5000 Series
Page 1: ...19 5000 M Version 1...
