™
Use a cable with a female 6-pin connector with strain reliefs to ensure proper
electrical connection and to reduce stress.
Ensure a low impedance electrical connection between the
901P transducer body and the grounded vacuum system to
shield the sensor from external electromagnetic sources.
To comply with EN61326-1 immunity requirements, use a braided, shielded
cable. Connect the braid to the metal hoods at both ends of the cable with
the end for power supply connected to earth ground.
925 I/O Connector (6 pin)
6 pin Hirschmann
PIN
Description
1 Identification resistor 3KΩ
2 Analog
3 Analog Output –
4 Power + (9-30 VDC)
5 Power return -
6 Chassis