Chapter Two: Installation
How To Unpack the Type 722C Unit
43
Chapter Two: Installation
How To Unpack the Type 722C Unit
MKS has carefully packed the Type 722C unit so that it will reach you in perfect operating order.
Upon receiving the unit, however, you should check for defects, cracks, broken connectors, etc.,
to be certain that damage has not occurred during shipment.
Note
Do
not
discard any packing materials until you have completed your
inspection and are sure the unit arrived safely.
If you find any damage, notify your carrier and MKS immediately. If it is necessary to return the
unit to MKS, obtain an RMA (Return Material Authorization) Number from the MKS Service
Center before shipping. Please refer to the inside of the back cover of this manual for a list of
MKS Calibration and Service Centers.
Caution
Only qualified individuals should perform the installation and any
user adjustments. They must comply with all the necessary ESD and
handling precautions while installing and adjusting the instrument.
Proper handling is essential when working with all highly sensitive
precision electronic instruments.
Unpacking Checklist
Standard Equipment:
•
Type 722C Unit
•
Optional Equipment:
•
Electrical Connector Accessories Kit - 722C-K1 (includes a mating connector for the
electrical connector)
•
Most pressure, flow, flow ratio, and throttling valve controllers
•
MKS Type 146, Type 660, Type PDR-C-1C, or Type PDR-C-2C power supply/readout
unit, or PDR 2000 dual channel power supply/readout unit
•
Cables to connect the 722C transducer to the above equipment
