MKS Baratron 722B, Instruction Manual

Page: 53 / 71

Chapter Two: Installation USetup
Interface Cables
Interface cables to all MKS companion products can be purchased from MKS. Refer to Table 5
for a listing of the cable numbers.
As of July 20, 2009, all products shipped to the European Community must comply with the EMC
Directive 2004/108/EEC, which covers radio frequency emissions and immunity tests. MKS
products that meet these requirements are identified by application of the CE Mark.
Note
Metal braided, shielded cables are required to meet CE Mark
specifications.
Interface Cables
Transducer
Connector
MKS Power
Supply/Readout
Cable Description Cable Number
9-pin Type “D” Type 146, 660 9-pin Type “D” to 15-pin Type “D” CB700-S-1-X
PDR-C-1C, PDR-C-2C,
PDR-D-1
9-pin Type “D” to flying leads CB700-S-2-X
9-Pin Type “D” PDR 2000 Dual Channel
Single 9-Pin Type “D” to
Dual 9-Pin Type ”D”
CB2000-2-m1 (10ft)
-M2 (20ft)-M3 (30ft)
where X indicates the length of the cable, in feet
Table 9: Interface Cables
53