Technical Documentation
mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfield, CT 06002
|
(860) 769-5500
|
www.mknorthamerica.com
©2020
|
Page 20
10
TROUBLESHOOTING
(CONT.)
Symptom
Cause
Remedy
Unusual noise
Worn/damaged bearings in the
drive unit
Check/replace bearings in the drive
unit
Damaged or deformed wear strip Check/replace wear strip
Speed of the conveyor too high
Reduce speed, pay attention to noise
level
Check the recommended speed of
the conveyor
Conveyor chain too loose to over-
tensioned
Shorten or lengthen conveyor chain
Abnormal wear of plastic
conveyor components
Overloaded conveyor system
Remove the load from the conveyor
and test conveyor
Check the maximum load capacity
for conveyor
Ambient temperature too high
Check the recommended ambient
temperature
Chemicals in the environment
which attack the plastic parts
Check whether there are damaging
chemicals in the contact with the
conveyor system
Foreign objects damage/wear
out the plastic parts
Clean conveyor system with warm,
soapy water
Identify he source of the foreign
objects
