Technical Documentation
mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfield, CT 06002
|
(860) 769-5500
|
www.mknorthamerica.com
©2020
|
Page 14
7
CONVEYOR STANDS/SUPPORTS
(CONT.)
RISK OF INJURY!
Maintenance work should only be preformed by qualified personnel.
Conveyor power MUST be disconnected and locked-out prior to servicing.
When conveying heavy piece goods or by bumping, the entire mk product can tip and cause serious injuries.
•
Stands which are designed to be anchored to the ground should be so secured using floor anchors.
•
Mount stands as closely as possible to the ends of the conveyor.
•
When using only one stand, install it as close as possible to the center of gravity.
•
Always engage the caster brakes on mobile stands.
•
Pay attention to the maximum allowable load.
•
After adjusting the stands, ensure all screws are securely tightened.
7.1
Conveyor Stands/Supports
ATTENTION
Product Damage!
Trouble-free operation cannot be guaranteed if the mk product has not been carefully installed.
•
Prepare the installation site so that the mk product stands level to the floor.
•
Carefully install all connections and check that they are tight.
•
To ensure against tipping, the stands or base plates of the mk product must be anchored to the floor.
!
WARNING!
