Prince™ XL/Spool Gun - Owner's Manual Page 37
Section 34
Prince Spool Gun Controls
For All CV and CC Power Supplies
The WC-1(P/N 001-3062) is designed to hook-up to any CV or CC power
supply having its own contactor. CC Posa Start "run-in-speed" is included as
a standard feature. The control operates on 115VAC, 50-60hz power. For
machines such as gas drives that do not have contactors, the Contactor Box
P/N 001-3066 must be used in addition to the WC-1.
Although this control will work on any power supply we have developed other
controls that are less expensive and easier to install.
For Miller Power Supplies with 14 pin Amphenols
Connects directly to Miller power supplies with 14 pin amphenols that are
classified as type 6 or 9 and Thermal Dynamics units, such as:
MILLER SUPPLIES
THERMAL DYNAMICS
Millermatic 200
Regency's
Thermal Arc 300GMS CC/CV
Shopmaster
Deltaweld's
CV/CC XMT's
CP Series
Trailblazer 250
Any Gas-drive that has a CV tap and contactor installed with a 14 pin
amphenol
For L-Tec Migmaster 250 & ESAB Migmaster 251
An amphenol adaptor cable and gas/power lug are all that is needed to
connect to the Migmaster 250. Adaptor kit includes everything needed.
A panel kit plugs directly into the front of the Migmaster 251 and includes
everything that is needed to interface the spool gun.
Note: In order to achieve proper operation with the Prince™ and Prince™ XL
Spool Guns, please install the 800 ipm spool gun motor P/N 211-0071, if not
already in use.
For Power Supplies that Supply an Auxiliary 26 VAC
This Generic Torpedo is designed to hook-up to CV power supplies that
supply an auxiliary 26 VAC @ 1.7 amps and uses a closing contact signal.
The unit is supplied with bare wires that must be connected to the power
supply. Some examples of power supplies that can be hooked-up are:
Lincoln SP-250 & Wirematic 250 - Airco Dip-Pak 200, 225 & 250 - Beta-Mig 200 & Beta-Mig LF
Consult factory for details.
For Millermatic 250 and Vintage
The easy to install, plug-in module and the spool gun are all that is needed to
get up and running.
For Millermatic 250X
Easy to install adapter cable using Millermatic 250X speed control.
For Hobart BetaMig 251
The easy to install, plug-in module and the spool gun are all that is needed to
complete the system.
For Panasonic Gunslinger
Easy to install adapter cable using Gunslinger speed control.
