Prince™ XL/Spool Gun - Owner's Manual Page 13
Section 11
OPTIONAL KITS
Insulated Groove Drive Roll Kit ....................................................... 005-0640
For .030" (0.8mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0150 and idler roll assy. P/N 003-2097.
Insulated Groove Drive Roll Kit ....................................................... 005-0641
For .035" (0.9mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0151 and idler roll assy. P/N 003-2097.
Insulated Groove Drive Roll Kit ....................................................... 005-0642
For .040" (1.0mm)dia. aluminum wire.
Includes insulated drive roll P/N 511-0152 and idler roll assy. P/N 003-2097.
Insulated Groove Drive Roll Kit ....................................................... 005-0643
For .045" (1.2mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0153 and idler roll assy. P/N 003-2097.
Insulated Groove Drive Roll Kit ....................................................... 005-0644
For .062" (1.6mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0154 and idler roll assy. P/N 003-2097.
NOTE: Insulated drive roll kits are used to prevent preheating of the wire
which may soften it and clog the liner. This picking up of current at the drive
rolls rather than at the contact tip is usually not a problem unless using too
large of a contact tip or excessively oxidized aluminum wire.
Prince™XL Handle Kit .................................................................... 005-0633
Includes left and right handle with door, trigger and pin,and all handle screws.
Spool Adaptor Kit ............................................................................ 005-0632
Includes left and right handle with door, trigger and pin,and all handle screws.
Used to change a standard 212-xxx or 213-xxx series Prince™XL torch into a
Spool Gun.
7 Pin “W” Clocked Adaptor Kit ........................................................ 005-0162
Used to update a 150-001, 002, 150-101, 102 and 150-201,202 (plastic door
models MK3A and MK3A PS) Cobramatic cabinets to allow the use of the
Prince™XL and other “W” clocked torches.
Section 12
OPTIONAL (12” and 18”) Water Cooled Straight
and Curved Barrel Assemblies
12” Straight Water Cooled Barrel Assembly .................................... 003-2085
12” Curved Water Cooled Barrel Assembly ..................................... 003-2086
18” Straight Water Cooled Barrel Assembly .................................... 003-2087
18” Curved Water Cooled Barrel Assembly ..................................... 003-2088
