MK Products COBRAMIG 300, Owner'S Manual, Page: 22 / 36

CobraMig
® 300
Owner's Manual -
Page 16
Maintenance
Power Supply
Periodically inspect all cables and hoses for damage or breaks in the
insulation jacket, particularly at the plugs or ends. Repair or replace cables or
hoses as necessary.
Remove grease and dirt from components and remove moisture from
electrical parts and cables.
Be sure that all connections are clean and tight.
WARNING:
ELECTRIC SHOCK can kill.
Shut-off disconnect and unplug unit before cleaning unit.
Every six months blow out or vacuum dust and dirt from the internal
components of the power supply. Remove the side panels and use a clean,
dry air stream or vacuum suction for the cleaning operation. If repairs
do become necessary, any part can easily be replaced by a qualified
maintenance person.
Your CobraMig 300 is designed to provide years of reliable service. Normal
wear and component failure may require occasional service. The number of
units in operation and the importance of minimal “down time” will determine
to what extent spare parts should be stocked on hand.
Section D