MK Products COBRAMIG 300, Owner'S Manual, Page: 18 / 36

CobraMig
® 300
Owner's Manual -
Page 12
Lock Advanced
Paramters
There are two values available:
Cabinet - Gas is controlled at the solenoid in the cabinet for all digital
guns with no gas valve including X series guns.
Gun - For use with classic guns with valve installed. Solenoid is
bypassed and gas is controlled directly at the gun.
This four digit lock will ensure that Advanced Parameters remain
secure from non-authorized changes for each individual memory.
USE THE “SELECT” BUTTON AND THE ADJUSMENT KNOB ON THE
FRONT PANEL TO SET LOCK CODE
To Lock: Rotate the adjustment knob to the desired first number, press the
“SELECT” button. Repeat until all four numbers have been established.
Once all four digits have been established, hold down the “Select” button
for three seconds to lock the machines Advanced Parameters and
return to the Operation Mode. Record the Lock Code for future use to
Unlock the Advanced Parameters.
To Unlock: Hold down the “SELECT” button for 3 seconds. The Front
Panel will Display LocD. The four digit lock code originally entered must
be entered using the same method as it was locked. Once the four digit
lock code is entered, press the “SELECT” button once to Unlock the
machine and access the Advanced Parameters.
If the Lock Code is lost or forgotten, please contact MK Products
customer service at 800 787 9707
There are two values available:
On – This mode will automatically save all your Operational Values and
Advanced Parameters for each memory individually as they are changed.
DO NOT NEED TO USE THE SAVE MEMORY BUTTON. Powering off the
unit will not affect the values that were automatically saved.
OFF – This mode allows memories to be saved and changes by the user
to not overwrite saved memories automatically. The Save Memory button
on the inside of the feeder will need to be held until the progress bars on
the front panel display stop (indicating that memory has been saved).
Failure to use the Save Memory button will revert all Operational
Values and Advanced Parameters to the last saved values when switching
between Memories in the Operation Mode. Unsaved memories will also
revert to last saved values when the machine has been powered off.
Adjusts LED display brightness
0 - 15
This parameter will not be displayed for X Series Digital guns. This setting
is auto-sensed and will only display if an analog gun is installed.
- Python
- Prince XL
- Cobra MX
- Cobra SX
- Cabinet
-Gun
Save Button
Settings for entire system
These settings are system wide (global), they are not
unique to each memory. These settings alter all
memories.