MK Products 127-008, Owner'S Manual

Page: 13 / 26

CobraTurn® T-260 Digital Turntable Owner's Manual -
Page 6
Display Messages
• 50H : 50Hz input frequency detected
• 60H : 60Hz input frequency detected
• bAd: This message is displayed for about 3 seconds and default
settings are restored and self-testing continues. WARNING: The turntable
SHOULD be recalibrated.
•
CAL : If the display shows "CAL", the hardware calibration needs to be
performed (never calibrated or corrupted).
• Err : Pressing invalid key causes this message to display for ~2 sec.
• Gnd : Ground fault, either missing earth ground or need to replace fuse
• nEE : This means the turntable memory was not set or lost. Power cord
needs to be unplugged to reset. If this error persists, please contact MK
support.
•
OFF : shutting off power in progress
• PdL : Pressing invalid key while foot pedal is plugged in and key is
ignored.
•
SLo : This flashing message is displayed during calibration after the data
is recorded.