MK Products 127-007, Owner'S Manual

Page: 10 / 25

AirCrafter
™
T-250 Digital Turntable Owner's Manual -
Page 3
Section B Operation
Initial Setup
1. Unbox unit from packaging. Save packaging for future
transportation of unit.
2. Plug the unit's power cord into a standard 120VAC outlet.
3. If you desire to use the provided foot pedal, plug the pedal cable into
connector on the side of the unit.
4. Attach a ground cable with a 1/2" ring lug to the ground terminal on
the unit.
Warning: Not attaching a ground cable directly to the unit while
welding on the turntable, may cause damage to the unit.
Reversely, leaving the ground cable attached to the unit while weld-
ing a part not on the turntable, may cause damage to the unit.