background image

 

Safety – It’s in your interest

 

 

Safety Guidelines. 

Safety of the operator is one of our main concerns, however it is up to the operator to 
practice caution.   
To avoid personal injury, study the following precautions and insist that those 
working with you to follow them. 
 
The MK Cultivator is designed for tilling soil and should not be used to transport 
material or equipment.  
 
Replace any decals that may be missing or not readable. Location of decals are 
indicated elsewhere in this manual. 
 
Do not use this machine while under the influence of drugs or alcohol. 
 
Review the safety instructions with all users annually. 
 
This equipment should not be operated by children: or those unfamiliar with the 
operation of the MK Cultivator. 

Do not allow persons to operate this machine until 

they have read this manual and/or were instructed by a qualified person.

 

 
Do not paint over, remove or deface any safety signs or warning decals on the 
Meteor® Blower. 

Observe all safety signs and practice the instructions on them. 

 
Do not allow anybody to ride on this equipment.  

Please be careful with the extra weight on the back of the tractor. It may be 

necessary to add weights on the front of the tractor to keep it balanced properly.  
 

Stop engine and remove key when attaching and un-attaching  equipment 

from tractor.  
 

4

Summary of Contents for CU-5












Reviews: