24
The saw is equipped with a Depth Indicator and a Depth Stop. The Depth Indicator tells you
approximately how deep you are in the cut. To set the indicator, you need to first lower the blade until it is just
touching the ground and then rotate the Depth Indicator knob to 0.
The Depth Stop is used for several cuts at the same depth. It is set by finding the desired depth and then turn-
ing the knob until it is tight. This will prevent cutting below the “locked” level to provide a consistent depth
with every cut.
MK-4000 SERIES
OPERATION
DEPTH INDICATOR AND DEPTH STOP
Depth Indicator and Depth Stop
Depth Stop
Depth Indicator
Summary of Contents for MK-4018HY
Page 4: ... MK 4000 SERIES Notes ...
Page 29: ...29 MK 4000 SERIES NOTES ...
