MK Diamond Products Inc. Customer Service Department (800) 421-5830
MK-145
Revision 09/04, Effective date – September 23, 2004
Page
6
SAFETY:
REDUCE THE RISK OF UNINTENTIONAL STARTING.
Make sure the ON/OFF switch is in OFF position before plugging in a power tool.
USE RECOMMENDED ACCESSORIES.
Consult the owner's manual for recommended accessories. Using improper
accessories may increase the risk of personal or by-stander injury.
NEVER STAND ON TOOL.
Serious injury could occur if a power tool is tipped, or, if the cutting tool is
unintentionally contacted.
CHECK DAMAGED PARTS.
Before using a power tool, check for damaged parts. A guard or another part that
is damaged should be carefully checked to determine it would operate properly
and perform its intended function. Always check moving parts for proper
alignment or binding. Check for broken parts, mountings and all other conditions
that may affect the operation of the power tool. A guard, or any damaged part,
should be properly repaired or replaced.
DIRECTION OF FEED.
Always feed work into a blade or cutter against the direction of rotation. A blade
or cutter should always be installed such that rotation is in the direction of the
arrow imprinted on the side of the blade or cutter.
NEVER LEAVE TOOL RUNNING UNATTENDED – TURN POWER OFF.
Do not leave a tool until it comes to a complete stop. Always turn a power tool
OFF when leaving the work area or when finished cutting.
Hazard Symbols:
ELECTRICAL SHOCK!
Never touch electrical wires or components while the motor is running. Exposed,
frayed or worn electrical motor wiring can be sources of electrical shock that
could cause severe injury, burns or death.
ACCIDENTAL STARTS!
Before plugging the equipment into an electrical outlet, be sure the ON/OFF
switch is in the "OFF" position to prevent accidental starting. Unplug the power
tool before performing any service operation.
ROTATING OR MOVING PARTS!
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury.
Never operate a power tool with covers, shrouds, or guards removed.
on
on
