2. Raise the leg by sliding it inside the slot.
3. Repeat the operation for the front side of the machine (See Picture 2)
4. Insert the tube-holder rod in its seat (See Picture 3).
Should it be necessary to disassemble the machine, carry out the above operations in reverse order.
PICTURE 1
PICTURE 2
PICTURE 3
13
UNPACKING, TRANSPORT and ASSEMBLY
ASSEMBLY:
Remove the machine from the packaging with the aid of the side carrying handles.
To set up the machine for work proceed as follows:
1. Remove the leg lock pin and raise the rear side (pump side) of the machine with the handle until the leg is
fully extended (See Picture 1).
