Changing the remote controller mode
Mobile Phone Installation on the Remote Controller
1. Pull out the mobile phone holder upwards completely (Pic. 1);
2. Tilt the holder 30 degrees towards you and then you will hear a click sound (Pic.2);
3. Rotate and fix the support board in place (Pic. 3);
4. Place your phone in the holder and adjust the mobile phone holder upward or downward to fit the
size of your mobile phone (Pic. 4).
!
Step 1. Press the red lock “ ” button and turn on the remote controller power, the remote controller is
under signal connection status (Pic.1);
Step 2. Press and hold the RTH button “ ” for 3 seconds to cycle through the remote controller modes
(Pic.2). The remote controller mode will switch every time the button is pressed. The mode
number is displayed on the LCD screen. The default factory setting is mode 2.
①
②
Attention: To change the mode of the remote controller, please make sure that the remote
controller is under signal connection status (the indicator lights keep flashing). If
not, the mode can not be changed.
Pic. 1
Pic. 1
Pic. 2
Pic. 3
Pic. 4
Pic. 2
X103W
User Manual
-14-
