X103W
User Manual
!
● Please make sure that the clockwise and the counter-clockwise propellers are installed on
the correct motors, because the drone will not fly normally for wrong propellers installation.
● Be aware of the sharp edges of the propellers. Handle with care.
● Use only the MJX approved propellers. Do not mix propeller types.
● Stand clear of the motors and
DO NOT
touch the propellers when they are spinning.
● Check that the propellers and motors are installed correctly and firmly before every flight.
● Ensure that all propellers are in good condition before each flight. DO NOT use aged,
chipped, or broken propellers.
● To avoid injury,
STAND CLEAR
of and
DO NOT
touch propellers or motors when they are
spinning.
●
ONLY
use original MJX propellers for a better and safer flight experience.
Attaching the propellers
Install propeller A and propeller B on the corresponding motor shaft and fix the rotor propellers tightly by
rotating clockwise. (A/B marks are at the bottom of the propeller)
Attaching and Detaching the Propellers
A
B
B
A
Detaching the propellers
Rotate the screws counter-clockwise to take out the screws and remove the propellers.
-9-