MJM MTF21, User Manual

Page: 7 / 14

7
Pedal Assist (PAS) Levels
This is the level of assistance the motor will deliver once activated. Your bike
has 5 PAS levels numbered from 1 - 5 with 1 being the lowest level of assistance
to 5 being the highest. Use the “+” and “
–
” buttons to adjust the PAS level.
If you want to ride with no assistance press the “
–
” button until a 0 is shown
in the assist section.
Lights - Turning on and off
Our bikes are fitted with automatic lights and will turn off and on depending
on the environment you are in.
To manually turn the lights on and off, when the bike is turned on press and hold
the “+” button. After a couple seconds you will see the headlight icon pop on your
display, both the front and rear lights will turn on. Once you see this, release
the “+” button and the lights will remain on until turned off or the bike turns off.
To turn off, repeat this process until you see the lights turn off.
Walk Function
The walk function activates the motor at a slow speed to assist you
in walking the bike.
Press and hold the “
–
” button. After a couple seconds the motor will activate
and you will feel the bike move forward. Hold the “
–
” button while using the
walk function. Once you release the “
–
” button the walk function will turn off.
• the walk function will not work if you are holding the brakes
Display and
Controller