SAFETY WARNING
1. Warning
﹡
Every person involved with the installation , operation and maintenance of this
device has to be qualified .
﹡
User must follow the instructions of this manual
﹡
Unqualified person can not open the housing cover and operate the device , or the
dealer will not accept liability for any resulting defects or problems.
﹡
The device against rain and moisture
2. Waring notes :
﹡
Power supply : AC 100V-240V , 50/60Hz
﹡
Make sure the power switch is off , the power plug , outlet and the earth connection
is in well condition before connecting the device with the mains.
﹡
Please use qualified power plug and the outlet. Never connect the power cord of
this device with other electrical equipment.
﹡
During move and installation , make sure the device not crashed with metal parts
and other tough materials.
﹡
Always disconnect from the mains, when the device is on the installation and
dismantled
﹡
The minimum distance between light-output and the illuminated surface must be
more than 50cm
﹡
The device must only be installed on a non-flammable surface . In order to
safeguard sufficient ventilation , leave 50cm of free space around the device . Please
note that heat-sensitive objects may be deformed or damaged by the emitted heat .
﹡
During the operation the housing becomes very hot ! Do not operate the device for
15 minutes after switching off .
﹡
The maximum ambient temperature Ta = 45
℃
must never be exceeded , The
maximum housing temperature Tb = 80
℃
must never be exceeded .
﹡
For indoor use
﹡
Replace any visible cracked protective shield , filters and lens .
﹡
The protective shiel, filters and lens will require weekly cleaning as smoke “Cfluid
tends to building up residues , reducing the light “Coutput very quickly.
9
1. Product Introduction
1.1
Product Feature
4 control mode
External control mode
DMX512 controller controller mode
（
2 kind of DMX Channel
）
Master/slave
Auto mode
Built-in Program
Different kind of Gradual change& Random change
Different kind of strobe
：
speed (slow to fast)
、
fix color( color
、
Gradual change)……
Setting Program
It can setting the program without the controller , it can setting Gradual
change
、
jump change
、
strobe ...(different effect)
And the program data can be down load from master light to slave light
Static model
It can fix the color without the controller ,also can be choose the color with
strobe
Sound model
Included 2 kinds of commonly used sound model
“Software cutting ”
In the STAR mode , working built-in program /setting program ,the light would be
turn off when the dimmer channel as "0"
（
procedure would keep working)
The difference with “BLACKOUT” key(controller keys) &"Software cutting"
：
only
work this light , and do not clear up the controller data .
White color
Setting different color temperature of white color
Screen Protection
Without operate key in 30 seconds , it enter black screen. Press any
keys then
it
can quit screen protection.
Temperature Protection
It can set to protect the temperature .
2
