Temperature information
This light install over temperature protect. If the light over temperature 60
℃
.The
brightness will decrease gradually
CAUTION!
The brightness will decrease gradually when the light temperature
is over 60
℃
,and if over 75
℃
,then will black out
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and
moistened cloth. Never use alcohol or solvents!
CAUTION!
Disconnect from mains before starting maintenance operation.
There are no servicable parts inside the device. Maintenance and service operations
are only to be carried out by authorized dealers.
If you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by
authorized dealers only in order to avoid hazards.
If you have further questions, please contact your dealer.
INSTALLATION
The device must only be installed at a vibration-free, oscilation-free
and fire-resistant location.
TECHNICAL SPECIFICATIONS
Construction: Aluminum
Power supply: AC100V~240V;50 Hz /60Hz
LED: RGBW 4IN1*60LEDs
Power consumption: max. 600 W
LED Beam Angle: 18°
LED Lifetime: 80,000-100,000 hours
5
INTRODUCTION
Thank you for having chosen our LED lighting
Unpack the device ,inside the box you should find:
The fixture device
One power cable
This manual
Please check carefully that there is no damage caused by transportation. Should
there be any ,consult your dealer and don’t install this device.
DESCRIPTION
Features
. Over temperature protect
.4 ,5 or 9 DMX channels selectable for numerous applications
.DMX-controlled operation, Sound-controlled operation or stand alone operation
with Master/Slave-function
. Automatic identify Master signal
. Stepless RGBW colour changing
. Equipped with 4IN1*60 LEDs
. Switch-mode power supply, 100V-240V
. Operation very easy
，
human design
，
dimming no flicker
、
jitter phenomena. Can
be adapted to video, photography, television and other demanding lighting
occasions.
DMX-512 control connection
The product has a DMX 512 input fitted with 3-pin XLR connectors. Screened
cables in compliance with EIA RS-485 specifications and the following
characteristics must be used for connections:
- 2 conductors plus screen
- 120Ohm impedance
- max. transmission rate 250kBaud.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an
electrically noisy environment, such as in a discotheque, it is recommended to use
a DMX terminator. This helps in preventing corruption of the digital control
signal by electrical noise. The DMX terminator is simply an XLR plug with a 120
OHM resistor connected between pins 2 and 3,which is then plugged into the
output XLR socket of the last fixture in the chain.
2
Summary of Contents for MJ-2610D18-4IN1
Page 2: ......
