IV. Waterproof manage:
Signal joint(at most 30pcs)XL-3R,at first, use the high voltage and waterproof
adhesive tape with mucosity to enlace the joint one circle. After stretch the
adhesive tape, then you can enlace it, please reference the operation
describe.), then cover a 20mm cannula with pyrocondensation.
At last, envelop the joint to reach a waterproof effect.
Warning
If this joint can’t do the waterproof manage, then the lamp waterproof effect will
be invalid, then destroy the product.
V. Channel List:
Channel
Value
Function
CH1
0-255
Main dimming from dark to bright
CH2
0-255
R dimming,
Linear dimming,
from dark to bright
CH3
0-255
G dimming,
Linear dimming,
from dark to bright
CH4
0-255
B dimming,
Linear dimming,
from dark to bright
CH5
0-255
Control strobe from slowly to quickly
CH6
0-50
DMX 7 channel control
51-100
Color change by Snapping
101-150 Color change by Fade
151-200 Color change by
Pulse
201-255 Sound control
CH7
0-255
The speed of function from slowly to quickly
I. Installation:
1.This light can work normally between the Voltage of AC90~~240V/50Hz/60Hz.
2. In order to secure the safe installation of the light, always use it in the
well-ventilated environment.
3. Always keep this light with a safe distance from any flammable materials.
4. Never install, dismantle and maintain this light when it is powered; and all
work aforesaid must be conducted by professionals.
5. The packing list of this light is as follows:
1) Light----------------------------------------------1pcs
2) Power Cable-----------------------------------1pcs
3) User Manual-----------------------------------1pcs
II. Modes of Operation:
There are four modes of operation: DMX control (Slave), Sound, Automatic, and
Manual. In the Sound, Automatic, and Manual settings, the unit will perform
independently and will send DMX signal, so that other fixtures may be linked.
This is useful if you want every fixture doing the same thing and do not wish to
use an external DMX controller. All menu settings will be retained even after
the lights have been powered off.
1. DMX Control – Fixture is remotely controlled via a DMX controller (sold
separately).
2. Sound Control – Fixture changes color in response to noise.
3. Manual Control – Color are manually set via the control pad.
4. Automatic Color Cycle – Unit cycles through colors automatically. User
sets whether fade is instant or slow, whether 3 or 7 colors are used, and
the length of time between fades.
5.
No.
Display
Function
1
A001
A001
—
A512 (7 channel) press “UP” and
“Down” button change the DMX address
